Wavlink routers are popular networking devices with many excellent features and functions. If you want to change the router settings, you can access them using Wavlink’s default IP address 192.168.10.1. Here are the detailed steps:

Step 1: Make sure you’re connected to the router

First, make sure your computer or mobile device is connected to the Wavlink router’s Wi-Fi network. Then, enter http://192.168.10.1 in your browser and press Enter.

Step 2: Enter username and password

When you enter the URL, you’ll see a login page. Enter your default username and password on this page. If you have never changed these credentials, you can find them on the back of the router or in the manual. If you have changed these credentials, use your own set username and password.

Step 3: Access control panel

Once you’ve successfully logged in, you will be taken to the router’s control panel. On this page, you can easily change WiFi names and passwords, configure port forwarding, set up Internet connection types and more.

Please note: If you are unsure of how to make changes, please refer to the Wavlink router manual or seek further assistance.
Wavlink routers are excellent networking devices that can help you create stable and high-performance WiFi networks. Accessing router settings through 192.168.10.1 is very simple, just follow the above steps to complete it. If you encounter any problems, please read the manual carefully or seek further assistance.

If you are unable to access the Wavlink router settings page:

Ensure that your computer or mobile device is connected to the Wi-Fi network of the router if you can’t open the Wavlink router login page after entering the URL.

If the router settings page is not accessible, it may be because the IP address of the router has changed. You can try using a network scanning tool like Advanced IP Scanner to find the new IP address of the router.

If you still can’t access the router settings page, check that the router’s Ethernet cable is correctly connected. Ensure that the LAN port is connected to the computer or switch device and the WAN port is connected to the upstream networking device (such as a modem or upstream router). Also, ensure that the power plug of the router is properly inserted, and the indicator light shows normal.

If all settings are correct but you still can’t access the control panel, it may be necessary to reset the router. Please note that this operation will delete all user data and configuration information, so be sure to back up important data first. Find the reset button on the router (usually on the back) and hold down the button until the router restarts.

If you are unable to access the Wavlink router’s settings page, check the network connection, IP address, cable connections, and router power. If the problem persists, try resetting the router or seeking technical support.