The WAVLINK router web management address wifi.wavlink.com is not accessible. This is because in situations where the user’s network environment involves multi-level routing, the user’s computer may not necessarily be connected to the WAVLINK router. Consequently, wifi.wavlink.com cannot resolve to the correct location. To avoid users being unable to access the management interface, this article explains how to manage the router using an IP address and recommends that users use the default IP address to log in to the management interface.

Here are the simple steps on how to access the management interface using the
router IP address:

Step 1: Determine the Router IP Address

Open the command prompt or terminal on your computer or mobile device and enter “ipconfig” (Windows) or “ifconfig” (Mac) to find the default gateway IP address. In most cases, the default management IP address for a WAVLINK router is 192.168.10.1. If you have changed the router’s management IP address to another address, use that address to log in to the router management interface. If you are unsure of the router’s IP address, please refer to the router manual or contact technical support.

Step 2: Enter the Router IP Address

Enter the router IP address in your browser and press Enter. Then, enter your default username and password on the login page. If you have never changed your credentials, you can find them on the router packaging box or manual.

Step 3: Access the Router Control Panel

Once logged in successfully, you will be taken to the router control panel. On this page, you can easily change WiFi names and passwords, configure port forwarding, set up Internet connection types, and more.

Note: If you are unsure of how to make changes, please refer to the router manual or seek further assistance from technical support if you encounter any problems.

How to access router settings using Wavlink 192.168.10.1